Our products

DESIGN – TWO PIECE with NOTCHED SHOULDER

HEAD DESIGN
LAYERS: 2 ply
LENGTH: From top of head to neck: 13 inches
WIDTH: Back seam to top of face: 9 inches
Back seam to bottom of head: 11inches

BIB DESIGN
LAYERS: 2 ply
LENGTH: 8 inches (front and back)
NOTCHED SHOULDER DESIGN:
From top of head to bottom of notched shoulder: 15 inches

OVERALL HOOD LENGTH:
From top of head to bottom of apron: 21 inches
SIZING: One size fits all (universal size). Do not modify, change, or alter your protective hood in any manner.

FACE OPENING MEASUREMENTS
RELAXED: 5 inches (UL requirement 4.7-5.7 inches)
Face opening is sewn with ½ inch elastic.
STRETCHED: 15 inches

CONSTRUCTION
SEAMS: All seams are merrow stitched then top and bottom covered with a 5-thread cover stitch for extended durability. All bottom edges are bound with binding.
THREAD: 100% Nomex

Our Ultra C6 PAC II – Strategic Vent Zone Hood Provides superior protection by combining  Majestic’s Ultra C6 ? CarbonKnight fabrics in an innovative new hood design which allows heat to escape without the risk of steam burn.

Ultra C6 TTP  - 31.8 cal/cm²    

CarbonKnight  TTP  - 35.0 cal/cm²

These Majestic hoods are UL certified and are compliant to meet the NFPA 1971-2007 standard of performance (Protective Ensembles for Structural Fire Fighting and Proximity Fire Fighting, 2007 Edition). Hoods also comply with Cal/OSHA standards.

All thread used is 100% nomex. Labels are fire resistant and pass tough new durability tests. Each hood contains an easy to understand user guide.

Nomex Specification Sheet

PAC II Specification Sheet

Show off your little leprechaun spirit with this hood embroidered with a Green Shamrock

DESIGN – TWO PIECE with NOTCHED SHOULDER

HEAD DESIGN
LAYERS: 2 ply
LENGTH: From top of head to neck: 13 inches
WIDTH: Back seam to top of face: 9 inches
Back seam to bottom of head: 11inches

BIB DESIGN
LAYERS: 2 ply
LENGTH: 8 inches (front and back)
NOTCHED SHOULDER DESIGN:
From top of head to bottom of notched shoulder: 15 inches

OVERALL HOOD LENGTH:
From top of head to bottom of apron: 21 inches
SIZING: One size fits all (universal size). Do not modify, change, or alter your protective hood in any manner.

FACE OPENING MEASUREMENTS
RELAXED: 5 inches (UL requirement 4.7-5.7 inches)
Face opening is sewn with ½ inch elastic.
STRETCHED: 15 inches

CONSTRUCTION
SEAMS: All seams are merrow stitched then top and bottom covered with a 5-thread cover stitch for extended durability. All bottom edges are bound with binding.
THREAD: 100% Nomex

HEAD DESIGN
LAYERS: 2 ply
LENGTH: From top of head to neck: 13 inches
WIDTH: Back seam to top of face: 9 inches
Back seam to bottom of head: 11inches

BIB DESIGN
LAYERS: 2 ply
LENGTH: 8 inches (front and back)
NOTCHED SHOULDER DESIGN:
From top of head to bottom of notched shoulder: 15 inches

OVERALL HOOD LENGTH:
From top of head to bottom of apron: 21 inches
SIZING: One size fits all (universal size). Do not modify, change, or alter your protective hood in any manner.

FACE OPENING MEASUREMENTS
RELAXED: 5 inches (UL requirement 4.7-5.7 inches)
Face opening is sewn with ½ inch elastic.
STRETCHED: 15 inches

CONSTRUCTION
SEAMS: All seams are merrow stitched then top and bottom covered with a 5-thread cover stitch for extended durability. All bottom edges are bound with binding.
THREAD: 100% Nomex